04-11-2018, 12:59 AM
The kind of aluminum buckle base material is low in price, high in hardness, and has a certain thickness, which is very deceptive. Hand-eye and hand-picked good material Because the consumer basically easy do it yourself decks Spain can not see the test report of the ceiling material, so can only choose the ceiling by their own opinion. Experts suggest that consumers must take their own hands to pick good materials. When purchasing the ceiling of the aluminum buckle plate, it is necessary to look at the aluminum, the film, and the back cover.
The quality of the aluminum buckle plate is examined from these three aspects. The first is to check anti skid flooring manufacturer South Africa the material of aluminum, because the average consumer is difficult to see the aluminum material, it is recommended that consumers look at the hardness of the pinch, and then check the paint surface is smooth, no burr, with or without color.
Second, look at the film, consumers can pull the edge of the board, if there is a film from the phenomenon shows that this film and the buckle board floor finishing materials is not closely; again is to look at the back cover (buckle back), which is by many consumers One part that is ignored. In general, anti-corrosion treatment is applied to the back surface. Hand rubbing is used. If the back cover can be peeled off, it indicates that the material is not good. In general, the regular manufacturer will mark the manufacturer's mark and the production date on the back cover, and whether or not these words are used. Consumers can also identify good or bad products. If there are both, it means that it is a regular manufacturer of machine production, different from waterproof deck with thermoplastic a small workshop, the quality is relatively secure.
The quality of the aluminum buckle plate is examined from these three aspects. The first is to check anti skid flooring manufacturer South Africa the material of aluminum, because the average consumer is difficult to see the aluminum material, it is recommended that consumers look at the hardness of the pinch, and then check the paint surface is smooth, no burr, with or without color.
Second, look at the film, consumers can pull the edge of the board, if there is a film from the phenomenon shows that this film and the buckle board floor finishing materials is not closely; again is to look at the back cover (buckle back), which is by many consumers One part that is ignored. In general, anti-corrosion treatment is applied to the back surface. Hand rubbing is used. If the back cover can be peeled off, it indicates that the material is not good. In general, the regular manufacturer will mark the manufacturer's mark and the production date on the back cover, and whether or not these words are used. Consumers can also identify good or bad products. If there are both, it means that it is a regular manufacturer of machine production, different from waterproof deck with thermoplastic a small workshop, the quality is relatively secure.