Solid wood floor maintenance
#1
1, painted:Use three or five years, the original paint can be the same floor paint, paint the floor again. In addition to dust before the paint decontamination, but also apply a little bit of water scrub paper, dipped in warm water, the surface gently polished again, rubbed on the residue of the oil on it, and rubbed on the last paint left small tablets. After polishing with a clean rag wipe clean, you can brush the paint. This paint after the floor, will be more smooth, more clean.
2, heat:If you encounter water leakage, wooden floor water, must be promptly cleaned, can not be directly exposed to the sun or electric baking, so as not to dry too fast, cracking the floor. Long-term use of solid wood flooring, should not be covered with plastic sheeting or newspapers, because over time, the film will be sticky, tarnished. At the same time avoid the hot water pot, hot rice cooker and other objects directly on the floor surface, so as not to burn the film.
3, scrub:In daily cleaning, you can use a vacuum cleaner to clean, and then use a soft cloth dipped in special detergent or soap thinner to clean. For large area cleaning, use a sprayer or rotary cleaner. For natural lacquered wood flooring, water does not do any good to it, when cleaning to minimize excess moisture, scrub wipes must be wringing. Oil wax wood floor to remove the black rubber wear marks and other can not be removed with water stains can be soft cloth dipped in low concentrations of alcohol or a little white wine removed.
"pagar kotak boks yang lebih baik,panel termoplastik panel hiasan kayu logam,wpc contractors or suppliers in singapore"
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  CV Cabinet Vision planit solid v11 dvdget3 0 359 01-15-2021, 12:53 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 415 10-28-2020, 11:09 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 415 10-28-2020, 12:36 AM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 387 10-18-2020, 09:08 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 387 10-16-2020, 06:38 AM
Last Post: dvdget3
  Siemens Solid Edge ST9 MP07 dvdget3 0 375 10-16-2020, 04:52 AM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 379 10-12-2020, 07:42 AM
Last Post: dvdget3
  Siemens Solid Edge ST9 MP07 dvdget3 0 414 10-12-2020, 02:16 AM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 383 10-11-2020, 11:12 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 352 10-09-2020, 10:51 AM
Last Post: dvdget3

Forum Jump:


Users browsing this thread: 1 Guest(s)