coating, the layers without grinding
#1
see the structure, look at the corner, see the curvature, see stare, see the flatness, see symmetry. First, the acceptance of woodwork standards 1, gypsum board and gypsum board transfer to be inverted V-shaped stitching, seam width 5mm to 10mm and consistent. 2, gypsum board appearance without pollution, split, missing edge, angle, hammer, defects. 3, gypsum board ceiling at the corner can not be sewn, corner must be "7" type cut. Second, the woodworking
acceptance method 1, to see the gap wood sealing line, angle, waist line decorative panels do not touch the mouth of more than 0.5mm, line and line clip mouth seam does not exceed 0.5mm, decorative panels and board no more than 0.5mm .2, see if the structure is straight. Regardless of the horizontal direction or vertical direction, the correct carpentry practice should be straight flat. 3, to see whether the corner angle is accurate. The normal corner is 90 degrees,
except for the special design factors. 4, see radian radians and roundness is smooth, smooth. In addition to a single, the same shape of the same shape to ensure the same. 5, to see nail eye ceiling structure used by the nails, need to be painted on the nail eye rust paint. 6, see the flatness should ensure that the surface of the woodworking project is smooth, no drum or broken. 7, see symmetry symmetry woodworking project is symmetrical. Attachment: woodworking
plastic swimming pool fence
composite plastic decking at home
easy clean exterior wall panels wholesale in canada
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Do it yourself Deck Cleaning, Coating, and Conditioning Deemed qizhen0809 0 539 08-28-2019, 01:51 AM
Last Post: qizhen0809
  Garage Floor Coating Finding the Best Option For Your Garage qizhen0809 0 468 08-19-2019, 10:59 AM
Last Post: qizhen0809
  Wear-resistant coating precautions qizhen0809 0 678 06-11-2018, 03:17 AM
Last Post: qizhen0809
  Nontoxic anti-corrosion coating qizhen0809 0 694 05-14-2018, 03:18 AM
Last Post: qizhen0809
  Nontoxic anti-corrosion coating qizhen0809 0 741 05-14-2018, 03:18 AM
Last Post: qizhen0809
  Exterior coating is bright qizhen0809 0 748 03-08-2018, 06:53 AM
Last Post: qizhen0809
  without any coating, it can be qizhen0809 0 768 03-04-2018, 06:27 AM
Last Post: qizhen0809
  without any coating, it can be qizhen0809 0 927 03-04-2018, 04:21 AM
Last Post: qizhen0809
  Henkel Bode coating of thin plastic coating qizhen0809 0 749 02-27-2018, 05:04 AM
Last Post: qizhen0809
  with the plate along the direction of grinding qizhen0809 0 824 02-23-2018, 08:25 AM
Last Post: qizhen0809

Forum Jump:


Users browsing this thread: 1 Guest(s)