plastering into the reinforced mesh

[qizhen0809]

200, part of the width of the flip package is 80, the specific practices are as follows: Mesh cutting length of 180 plus plate thickness. First in the flip package wipe the length of 80 for the width of 2 dedicated adhesive, and then pressed into 80 long mesh cloth, the rest thrown aside. (3) The configured special adhesive coated in the back of the composite foam cement board, the adhesive compaction thickness of
about 3, in order to ensure a strong bond, it is best to use full sticky, sticky method can also be used And the point of law. (4) sticking method: with a tooth trowel knife special adhesive horizontal evenly wipe the composite cement foam board, the strip width 10, thickness 10, in the distance 50. (5) Point method: wipe Sub-block in the middle of each block and wipe special adhesive, and then in the
composite cement foam board wipe diameter 50, thickness of 10 gray cake. (6) The special cement binder will be glued to the concrete quickly bonded to the wall in order to prevent the surface of the skin and lose the effect of binding. (7) composite cement foam wall sticking on the wall, the application of 2 meters by foot pressure flat operation, to ensure its smoothness and paste firmly between the board and
3d wall panel india 2017
how to build acoustic fencing on google
who makes the best composite deck