surface of the floor water
#1
re-used. 3, strengthen the floor water Whether it is a large area of water or a small area of water, it is not recommended to pry the floor to dry, it is easy to cause damage to the floor, it may cause serious consequences can not be used again. It is best to quickly drain the surface of the floor water, and then temporarily remove the floor
skirting line, exposing the expansion joints, the expansion joints will be distributed after the water vapor, depending on the amount of water into the dry up usually takes about seven to fifteen days, the quality of more Fortunately, the flooded floor, which is not immersed for a long time, can be restored by itself. If it can not be recovered
after 15 days, it has to be replaced. 4, along the keel pry up a solid wood floor in time found a small area of water, the ground can be cleaned, the board pry up, the wet floor dry and re-install; if the influent is slightly larger, not only Pry leaking board, but also should be along the keel arranged in the direction of the board also pry the
" plastic lumber irvine , price of old yakal wooden posts in the philippines " " tongue and groove wooden decking , cost of 2x6 treated lumber "
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 496 03-24-2021, 01:50 PM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 464 03-23-2021, 03:20 PM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 406 03-16-2021, 05:35 PM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 303 03-09-2021, 01:08 AM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 309 03-02-2021, 12:58 PM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 341 03-02-2021, 12:06 PM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 353 03-02-2021, 11:38 AM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 286 02-26-2021, 06:03 AM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 331 02-15-2021, 08:38 PM
Last Post: dvdget3
  Aquaveo Surface-water Modeling System 13.0.14 x64 dvdget3 0 352 02-10-2021, 06:32 AM
Last Post: dvdget3

Forum Jump:


Users browsing this thread: 1 Guest(s)