Domain Social Forums

Full Version: clarification barrel
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
How to adjust AB glue curing speed AB glue curing speed and strength can be completely adjusted, because AB glue curing speed is with the ambient temperature changes. AB glue for metal, ceramic, wood, glass and plastic packaging between the adhesive, have excellent bonding strength; cured adhesive strength, good hardness, good toughness; acid and alkali resistance white plastic handrail wholesale in spain after curing is good, Moisture-proof, anti-oil and dust-proof performance, resistance to heat and atmospheric aging; cured with good insulation, compression, high bonding strength electrical and physical characteristics.
Curing speed is slow: due to the glue has expired or the temperature is too low or A, B plastic volume is too great and other causes. If AB glue curing speed and strength can be completely adjusted, because AB glue curing speed is with the ambient temperature changes. AB glue for metal, ceramic, wood, glass and plastic packaging between the adhesive, have excellent how to keep a 3/16 gap in decking bonding strength; cured adhesive strength, good hardness, good toughness; acid and alkali resistance after curing is good, Moisture-proof, anti-oil and dust-proof performance, resistance to heat and atmospheric aging; cured with good insulation, compression, high bonding strength electrical and physical characteristics.
Curing speed is slow: due to the glue has expired or the temperature is too low or A, B plastic volume is too great and other causes. If the expired, should be discarded; if the temperature is too low, it may be appropriate golf course perimeter fences to heat up; if A, B glue is too poor, you should make it close to the ratio of 1: 1 How to use: Clean the surface of the sticky material moisture, dirt, Things, keep clean.
Large area bonding, double-sided coated AB glue, coated in a bonding agent A agent, the other side can be coated with B agent to fit. Small area bonding, the AB agent can be mixed after coating the same bonding surface, and then paste the two bonding surface, or automatic mixing glue coating equipment, bonding 3-5 minutes, you can get Initial strength. AB plastic use should pay attention to well-ventilated. Before use or after work, to patio flooring costs avoid mixing AB two, so as to avoid hardening.