Domain Social Forums

Full Version: so that the stone and adhesive
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
(according to the instructions for the use of adhesive products) posted finished stone, paste it to slightly twist and rub the stone up and down or tapping gently with a wooden mallet so that the stone and adhesive in close fit. (For the wall paving, the construction team can also add copper wire according to the design requirements firmly) 3, the level of correction and the seam between the adjacent plate, pay
attention to the stone should be reserved for 2mm or more seams. 4, the initial cleaning attached to the surface of the plate dirt, paste the stone after 3 days (according to the instructions for the use of artificial stone adhesive only) before the Qing stitching, caulking treatment, caulking should be used artificial stone caulking agent . 5, after the caulk cleaning (can not be used with acid-base cleaners, ceramic tile
caulking agent recommended artificial stone cleaner) attached to the surface of the sheet caulking material and dirt. 6, stone paving, after the film was torn open after inspection and clearance. 7, it is recommended not to use traditional wet stone hanging construction. Second, the sealant shop floor paving application 1, the first surface of the ground with water to wet, until the surface is clear water can be
cheap wood ceiling applications
recycled plastic lumber wholesale
outdoor plastic flooring material