Domain Social Forums

Full Version: Adhesive mortar and mortar are one-component
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
China's thermal power plant fly ash main oxide composition: SiO2, Al2O3, FeO, Fe2O3, CaO, TiO2 and so on. Construction Points 1. Hanging baselines, hanging in the outer wall of the major horns (Yang Kok, Yin angle) and other necessary vertical lines, hanging in the appropriate level of each floor horizontal line to control the vertical foam board Degree and level of degrees. 2. Preparation of materials
Adhesive mortar and mortar are one-component materials, water-cement ratio should be prepared in accordance with the material supplier's product manual, with a mortar mixer Stirring, mixing time after the completion of the feed is not less than 5min, a formulated dosage to 4h Use within the appropriate (summer construction time should be controlled within 2h.) 3. Foam cement paste in the grass-roots wall
paste should be used full law and meet the following requirements: (1) Before the laying of foam cement board Surface dust should be removed. (2) Foam cement board construction should start from the first floor, and 300mm from the foot level at the pop-up line with 1; 3 cement mortar and in accordance with the requirements to add a certain amount of waterproofing agent, paint and foam cement board the
lightweight hollow composite decking for docks
spiked deck tiles
prices for composite decking