Domain Social Forums

Full Version: material selection and construction
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
the hole around the additional grid cloth. (3) Apply the polymer mortar evenly to the front and sides of the foamed cement insulation board at the openings of the openings and the gridding cloth (only allow the polymer mortar on the edge of the insulation board here). Will be thrown before the grid cloth Yan board thickness flip, and pressed into the polymer mortar. (4) The entire grid cloth along the horizontal
direction Beng straight, pay attention to the curved side of the mesh cloth inwards, with a trowel from the middle up, the next two sides of the grid cloth smooth, so close. Mesh horizontal overlap width of not less than 100, lap perpendicular to the length of not less than 80, lap joints with mortar to supplement the bottom of the vacancy mortar, mesh cloth shall not be pleated, hollowing, Alice edge. (5) At the
concave and convex line angle, a narrow mesh grid should be embedded in the bottom polymer mortar, and the entire grid should be laid on a narrow mesh grid with a lap width of 80.Foam cement composite board (space board) is a steel side cabinet or prestressed concrete side cabinets, steel trusses, foam cement core material, the upper and lower cement surface layer (including fiberglass mesh)
solar reflectance wood deck
plastic wall board panels in qatar
kitchen cabinet hdf board