Domain Social Forums

Full Version: Wooden floor laying process
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
1, in order to prevent the accumulation of detergent in the groove, soak the detergent rags try to wring dry. Floor wax remover can cause marks and bulges on the floor, never use it. Wipe with wiping cloth. Wipe with a hard cloth wringer. Floor surface, especially the groove part, to carefully wipe, do not leave detergent. Such as residual detergent and moisture, can cause the surface whiten, bulging.
2, everything should pay attention to fully dried: If not fully dried, the floor wax will not be closely attached to the floor surface, affecting the appearance of white phenomenon.
3, at least three times to fight the wax, each time with a non-fuzz cloth or waxer to rub the floor so that oil penetrate the wood.
4, in order to get the glittering consequences, every time you hit the wax with a soft cloth light rub polish.Each fight again, to be dry, with very fine sandpaper polished appearance, clean, hit the second time.
"wpc decking materials china supply,cheap anti corrosive composite deck boards,wher to buy recycled plastic fencing"