+- Domain Social Forums (http://www.domainsocial.com)
+-- Forum: Marketplace Forums (no discussion) (http://www.domainsocial.com/Forum-Marketplace-Forums-no-discussion)
+--- Forum: Domains For Sale - Fixed Price/Offer (http://www.domainsocial.com/Forum-Domains-For-Sale-Fixed-Price-Offer)
+--- Thread: defective product (/Thread-defective-product)
defective product - qizhen0809 - 04-11-2018
the defective product will fade due to poor coagulation and water resistance. When looking at the ingredients when purchasing, the composition of the high-quality coating should be a copolymer resin or a pure wood plastic composite bearing pad acrylic resin. Don't forget to look at the product's shelf life. Although latex paint has many advantages such as convenient construction, strong hiding power, rich colors, scrub resistance, and strong environmental protection, it also has some common problems of quality. Bad handling will affect the quality of decoration.
Wall flowers and uneven colors are mainly due to the different colors of the grass roots and they are not processed. This situation must be re-brushed again to cover it. In addition, when selecting the materials, it is necessary to pay attention to cost of outdoor wood plastic composite panels selecting the same manufacturer, the same variety, and the same lot number, otherwise there will be a color difference. The main reason for the rough surface is that the base layer is not clean, the brush has grit, debris, or the operating environment is untidy. First, clean the base layer, thoroughly clean the brush, and clean the environment. The main reason for peeling is that the grass is too smooth or oily.
The base layer can be brushed with a steel brush and the base layer can be cleaned and the oil can be treated with a solvent for decontamination. The phenomenon of wallhigh qualities of a dust bin cracking is the most common and the specific reasons depend on the circumstances. If it is a GRC lightweight partition, joints must be carefully treated for crack prevention. Generally, glass fiber or kraft paper is used. The characteristics of the partition wall itself are prone to small cracks. Therefore, it is best to minimize cracking in home decoration. Once covered with glass fiber cloth or bean bag cloth, if the sand wall putty needs to be removed, it is best to put plasterboard after eradication of putty or eradicate the sand to the grassroots; if it is a load-bearing wall or solid wall, the cracking may be due to putty too thick or interval Short time, putty is not dry, this situation when the old house renovation when the top level ofmaking deck furniture from leftover deck the wall appears more, construction should pay attention.